Your cart is empty
Start ShoppingInitial System Startup and Testing
Your first startup of the PureOne system from Daily Hydrogen should be performed carefully. Ensure all safety equipment is worn and emergency supplies are ready. Verify the grounding wire is…
Your first startup of the PureOne system from Daily Hydrogen should be performed carefully. Ensure all safety equipment is worn and emergency supplies are ready. Verify the grounding wire is properly connected. Fill the generator tank with prepared electrolyte solution to the indicated level – never overfill. Check all connections for tightness and proper sealing. Plug the unit into a dedicated circuit (not shared with other high-draw appliances). Turn on the power switch and observe the initial operation. You should see bubbling in the sight glass within 30 seconds. The blue tint in the sight tube indicates proper hydrogen production. Run the system for 30 minutes initially, checking for any leaks or unusual sounds. Normal operating temperature is warm but not hot to touch. The digital display should show the frequency and duty% settings. Document your initial readings for future reference.